Roof Restoration

Roof restoration and coating with excellent properties.This unique treatment technology makes roofs self-cleaning, extremely water repellent, and prevents long term surface erosion.

Roof coating with excellent properties

Properla water repellent ®roof coating is scientifically developed by specialised engineers who have more than 30 years of experience in developing high quality protective coatings for the roofing industry. Treatments with Properla water repellent ®will extend the lifetime of roof tiles and eliminate further surface erosion. Properla water repellent ®has been developed to transform roofs from old and unattractive to clean and moss free.

Latest technology with organic formula

Properla water repellent ®roof coating is the leading roof coating system in Germany, engineered to improve roofs to resist weather influences caused by rain, frost and sun damage from moss and other algal growth.

Our Home Protection installers will renovate your roof, the process is a follows:

On the roof inspection

Jet wash roof tiles

Re-point ridges and verges

Repair and replace broken/missing tiles

Apply fungicidal wash

Apply Properla water repellent ®

Clean gutters

Clean all surrounding areas

Water repellent- super hydrophobic

The excellent water repellent properties of ProPERLA® will make your roof dry and extremely resistant to biological hazards, mould, mildew, moss or algal growth. Dry roof tiles will improve the thermal resistance, prevent frost damage and reduce the growth of micro spores.

Self cleaning efficiency

Dirt particles are unable to obtain a hold on a roof coated with Properla water repellent ®and will simply flow off with rainfall. Your roof tiles will remain clean and attractive for many years.

Quality standards

DIN EN ISO 7783-2 - Water vapour transmission

DIN EN ISO 1062/3 - Water permiability

Why restore roofs with ProPERLA®?

Extends the life span of the roof tiles

Improves the appearance of the roof

Could help to increase the property value

Rebuilds the original surface protection

Fast installation

Great savings – a much cheaper alternative to re-roofing

Roof coating process

Using our four stage process, specialised , airless spray equipment, long life coatings and our technical expertise the roof will be thoroughly cleaned down and repaired prior to spray application of the durable top coat.

Stage 1 – Cleaning Down

All tiles are thoroughly cleaned by high pressure water jetting to remove all traces of moss, algae, lichen, pollutants and carbonation.All gutters are cleaned inside and out to remove all of silt built up. Great care is taken not to block existing down pipes.

STAGE 2 - Biocide Wash

A Bio degradable detergent is applied to impregnate existing surfaces to eliminate any underlying active infestation of moss & lichen spores.This will retard any future re-growth in years to come, preventing any underneath spoilage to the finished coating.

STAGE 3 – Restoration Work

All defective mortar between crests, ridge and hip tiles is hacked out and re-pointed using a fibre reinforced polymer mortar. Any loose ridges, crests etc are re-bedded. All broken, damaged or delaminated roof tiles are replaced using same or similar profile. Any damage to mortar verges is re-sealed.

STAGE 4 – Coating

2 top coats applied by specialist airless spray equipment in customers chosen colour, 1st coat applied and allowed to dry (please note: drying time dependent on temperatures at time Of installation) A 2nd coat is applied to give a finish of a newly installed roof. Following completion, your property will be left in a clean and tidy condition.